Advertisement

Panasonic LUMIX SHX1 Interview – Tsumura-san on Blackmagic RAW, Missing ND, S9 Successor, and Firmware Hacks

During my visit to Panasonic’s headquarters in Osaka, I had the chance to sit down with Toshiyuki Tsumura-san, the man in charge of Panasonic’s imaging division. We talked about the new Panasonic LUMIX AU-SHX1 box camera, why it records Blackmagic RAW, why there is no internal ND filter, and whether Panasonic had to compromise to make filmmakers and broadcasters happy. And of course, I could not leave Osaka without asking about a LUMIX S9 successor, the future of Micro Four Thirds, and the new wave of camera firmware hacks.

For complete coverage of the camera announcement, head to our news article, review, and camera Lab Test.

NOTE: For the above video, for English translation: please turn SUBTITLES/CAPTIONS “ON”.

Toshiyuki Tsumura-san is Managing Executive Officer in charge of AVC Business, and Director of the Imaging Solution Business Division at Panasonic Corporation. In other words, the LUMIX cameras and Panasonic’s professional video products, from cinema to live production, all report to him. This piece is about the thinking behind the camera, and about a few questions that I know many of you guys have been asking for a while.

The interview was held in Japanese. What you read below is based on the English translation, and I shortened some of the answers so they are easier to read. If you want to hear every word, the full interview is in the video above. So, sit back and make yourself comfortable.

Toshiyuki Tsumura-san, head of Panasonic imaging division (left), and Kanda Kaito from product planning (right). Credit: CineD

A new kind of multi-purpose camera

CineD: What are the core advantages of the new camera?

Tsumura-san: For us, this is a camera with a new concept. One body covers everything from entry-level video production to full-scale cinema shooting and live streaming. It combines the technology we refined in LUMIX with the technology we refined in our professional AV business. Phase-detection autofocus and image stabilization are packed into an expandable box-style body with a vari-angle monitor, which no camera of ours had before. Add a grip, and you shoot with the freedom of a mirrorless camera, for YouTube content or lightweight cinema.

For cinema, we added Blackmagic RAW recording in addition to ProRes RAW, and for the first time, we worked with ARRI so that ARRI LogC3 comes pre-installed. On a set where ARRI cameras are the A-cameras, our camera can work as the B-camera, and in some cases, it can shoot entire scenes with the ARRI look. We also kept Open-Gate, so the camera is ready for vertical video. For live streaming, it keeps our full-frame LUMIX image quality, and our professional AV engineers added the input and output interfaces that live production needs, plus support for multi-camera setups and remote camera systems. We were also very particular about low latency, both when you pull focus and in live production.

Panasonic HQ, Kadoma-shi, Osaka. Credit: CineD

Two years since the integration

CineD: How long does it take to develop such a camera, and how do you make sure that you build cameras for the future and not for the past?

Tsumura-san: That is a difficult question. We could only build this concept because our professional AV business and our LUMIX business were integrated two years ago, in 2024. That let us hear directly from professionals in live production and on film sets, not only from consumer creators. We listened to more than 100 creators in total, and that is roughly how long it took to go from concept to product. In the end, we went far enough that the camera can be built into our own KAIROS switcher systems for live production.

“We have not compromised at all”

CineD: Panasonic has made box cameras before, but this one has to satisfy filmmakers and broadcasters. Did you have to compromise so that both groups are happy?

Tsumura-san: We have not compromised at all. We focused on the needs both sides share, and the box made the camera more attractive, not less. The box form gives mobility and expandability at the same time. With in-body image stabilization and a vari-angle monitor, the box plus a grip gets close to the mobility of a mirrorless camera. For professional use, we also designed it for heat dissipation and stability when the camera runs for long periods. From a professional point of view, the box style is the best form factor, and the feedback from more than 100 creators made that possible.

Blackmagic RAW, and will it ever go internal?

CineD: Will internal Blackmagic RAW recording be possible in the future?

Tsumura-san: Recording Blackmagic RAW on a camera that is not a Blackmagic camera is a first for the industry, and we are proud that we finished it in close cooperation with Blackmagic. Recording Blackmagic RAW directly to an SSD is also new. Proxy recording, on the other hand, goes to the internal CFexpress Type B card, which should make the editing workflow more efficient. We have received many requests to record Blackmagic RAW internally rather than to an external SSD; we are very aware of that need, and we continue to work on it for future development.

Tilta’s integrated focus and VND solution. Credit: CineD

Why there is no internal ND filter

CineD: The camera looks large enough to hold an internal ND filter. Did you consider one, and if yes, why is it not here?

Tsumura-san: Whether to include a built-in ND filter was a point we struggled with a lot. We wanted many functions in a compact body, and combining a built-in ND with in-body image stabilization was very difficult, so we had to choose one. When we interviewed our creators, they told us strongly that LUMIX image stabilization is essential on set, so we gave it priority. We also know how important an electronic ND is, so we took a new approach with a third-party partner, Tilta. Their external variable ND, announced at the same time, works from the same controls on the camera body, so you change the ND the way you change shutter speed or iris. With this collaboration, we answer both wishes: the ND and the stabilization.

A new line, not a VARICAM or EVA successor

CineD: Looking at the camera name, I see that you carry on the VARICAM and EVA heritage. Should we see this as the first camera in a completely new line?

Tsumura-san: Thank you, that is a good question. This product is a new concept and not a simple successor to earlier models such as the VARICAM or the EVA. It takes the thinking and know-how from both earlier series and combines them with the mobility and image quality of the LUMIX series. Please see it as our first step in a new initiative.

What is different from the LUMIX S1II?

CineD: In components and recording capabilities, the new camera is very similar to the LUMIX S1II. Can you please highlight the differences?

Tsumura-san: On a spec sheet, the recording performance looks similar, but this is not simply that camera in a box. The main difference is the concept: it is a step-up camera for professional and semi-professional creators who want to take on work one level higher, and it is built as a serious cinema camera in image quality, reliability, connectivity, and expandability.

The image sensor is new. The resolution looks the same as the S1II at 24 megapixels, but this time we added an optical low-pass filter, and we tuned the noise reduction for V-Log and ARRI LogC3 to keep very fine detail while suppressing moiré. That know-how combines the best parts of the VARICAM and the LUMIX S1H. Blackmagic RAW was not in the S1II, and the open gate mode is improved. 12G-SDI output, timecode input, and V-mount battery support are what professional sets ask for, and low-latency output for live work and focus pulling also sets it apart. Heat is important too: the S1II had a recording time limit, while this camera has a proper heat-dissipation structure and records without a limit, including at 4K 120p. And for the first time for us, it supports 32-bit float recording from the microphone input, so the body alone gives you audio that does not clip.

Panasonic LUMIX SHX1. Credit: CineD

Three reasons to choose LUMIX

CineD: The price of the SHX1 puts it in Sony FX5 territory. Can you highlight three reasons why people should consider LUMIX over the competition?

Tsumura-san: The concept is quite different, but I would pick three points. First, flexible workflows: V-Log, ARRI LogC3, ProRes RAW recording, and Blackmagic RAW recording, so creators can choose what fits their environment. Second, despite the compact body, the camera records without a limit at 4K 120p, and it has in-body stabilization, a vari-angle monitor and excellent autofocus, so it is as comfortable as a mirrorless camera and reliable enough for professional sets and run-and-gun work. Third, live production: it supports interfaces and protocols that drop straight into KAIROS systems, plus 12G-SDI and expandable multi-camera and remote operation, so it can be used in real professional live-streaming environments.

A trigger to step up

CineD: Is there anything else you would like to say about the new camera?

Tsumura-san: Our main purpose was not only high specs. Many creators are limited by their equipment or their shooting environment, and they want to make better work or try a new kind of project. We want to give those people a way to step up. We also want to stay with them after they buy the camera, through services, support, and third-party options, so they succeed in those challenges.

Is Panasonic’s footprint big enough?

CineD: Panasonic has brought innovative solutions to filmmakers for many years, yet its footprint is not as big as I would love it to be. Why do you think that is, and how do you want more people to use your very capable cameras?

Tsumura-san: Thank you for the comment. We do not really look at the whole mirrorless market at a macro level. Seen that way, our share can look low. But as a challenger, we focus on clear customer groups: creators who enjoy both video and stills and make hybrid content, customers who carry a small, light camera every day, and customers like those for this camera, who want to make serious cinema work. Measured by the number of people who connect with the LUMIX concept and keep using their cameras, LUMIX fans have increased year by year. So rather than focusing on macro-level market share, we want to keep creating together with our customers and grow together with them.

A LUMIX S9 successor with an EVF?

CineD: The LUMIX S9 (and L10) is well received by the community, and you got a lot of feedback from users. Can we expect a successor soon, maybe with a built-in EVF?

Tsumura-san: The LUMIX S9 has no viewfinder because we designed it for people stepping up from smartphones, who shoot on the monitor like on a phone. Many people support that approach, and it has been a popular model. Still, many customers tell us they want a viewfinder for serious photo and video work. More than two years have passed since the release; we have heard that voice strongly, and technology has moved on. We are working hard to meet your expectations. That is all I can say today.

LUMIX first. BRAW recording to an SSD.Credit: CineD

What about Micro Four Thirds?

CineD: The LUMIX GH7 came out more than two years ago. Is a new Micro Four Thirds flagship camera in the making?

Tsumura-san: The GH7 was developed to be very complete, including ARRI LogC3 support, and many fans still use it. New customers keep buying it today. Micro Four Thirds has a clear appeal that is different from our full-frame L-Mount series: small, light bodies and lenses, and a wide range of lenses that are already available. For video, it also gives you unlimited recording and smaller telephoto lenses. Our position has not changed: this is a very important system for us. For today, I would prefer not to comment on any potential successor models. But offering distinctive products in both Micro Four Thirds and full frame is one of our strengths, so please look forward to it.

AI and firmware hacks

CineD: AI is changing a lot, and many independent programmers are vibe coding new camera firmware that lets people do more with the same hardware. I do not expect Panasonic to support this publicly, but what is your opinion about it, and can Panasonic take advantage of this trend?

Tsumura-san: AI will be very important for cameras as it evolves. But we think the right way is to build AI in-house, to support our customers’ workflows and improve image quality, and then offer it to creators. We understand customers who hack their cameras and rewrite the firmware themselves, and it is probably difficult to stop that trend. But it is very risky for reliability, safety, and security, so we cannot recommend it. We want our customers to actively share their feedback on what they would like to see improved. It is then our responsibility to respond to those needs and continue evolving the camera through firmware updates. That relationship with our customers is the most important thing for us.

Thank you, Osaka

I would like to thank Tsumura-san for his time and for his very open answers, Kanda Kaito-san, and the Panasonic team in Osaka for hosting me. For full camera coverage, please read our LUMIX SHX1 news article, review, and Lab Test.

Guys, what do you think about the LUMIX SHX1 concept, and would you trade a built-in ND for in-body stabilization? Please share your thoughts with us in the comment section below!

Leave a reply

Filter:
all
Sort by:
latest
Filter:
all
Sort by:
latest