Advertisement

SmallRig Magnetic Phone Support Mounts the iPhone Duo on a Camera – MagSafe, Dual Rotating Shafts, 80g Aluminum Build

SmallRig Magnetic Phone Support Mounts the iPhone Duo on a Camera – MagSafe, Dual Rotating Shafts, 80g Aluminum Build

SmallRig wants you to put Apple’s foldable iPhone Duo on top of your camera and use its 7.6in inner screen as an on-camera monitor, held by nothing more than a magnet. The tool for the job is the company’s existing Support with Cold Shoe Mount, and the idea is more interesting than its small price suggests, as long as you take the warning that comes with it seriously.

SmallRig showed the setup in a short clip on its Instagram channel: an unfolded iPhone Duo, attached magnetically to a small arm in the camera’s cold shoe, above a cine lens. The SmallRig iPhone Duo mount in that clip is not a new product, though. The Support with Cold Shoe Mount has been in SmallRig’s catalog for a while as a MagSafe phone holder for camera-top monitoring, and it now gets a second job with the largest screen Apple has ever put in an iPhone. I have not had one in my hands yet, so this is a look at the concept and the specs, not a hands-on.

We covered the iPhone Duo when Apple announced it next to the iPhone 18 Pro, and SmallRig has been quick with accessories for Apple’s new phones, from the iPhone 18 Cinema Kit with its HawkLock cage to cases for the Duo itself. The Duo is not a pro video phone: it records HEVC and H.264 only, without ProRes or Apple Log 2. Its inner display is a different story, and that is exactly the part SmallRig is going after.

Why the Duo’s screen makes sense on a camera

According to Apple, the inner panel is a 7.6in OLED with 1878 x 2670 pixels at 430ppi, a nano-texture finish, ProMotion up to 120Hz, P3 wide color, 1,000 nits typical brightness and 3,000 nits peak brightness outdoors. The panel is close to square (about 1.4:1), so a 16:9 image does not fill it. By my own rough calculation from Apple’s figures, a 16:9 frame across the full width of the unfolded screen would be about 157mm / 6.2in wide, roughly 7.1in on the diagonal, with around 2670 x 1500 pixels.

That is the image size of a typical 7in on-camera monitor, at a much higher pixel density, with space left above or below the picture for app controls. My feeling is that the matte nano-texture finish could also help outdoors, where glossy phone screens tend to lose against the sun, but that is a guess until someone tries it on a sunny set. What the Duo will not give you are the tools a dedicated monitor has built in, such as SDI or HDMI inputs, LUT handling or false color, unless the app you use for monitoring provides them.

Attaching the iPhone Duo to the SmallRig mount on a Sony FX5, and the Duo in use as a monitor
Attaching the iPhone Duo to the mount, and the Duo as a monitor on a Sony FX5. Image credit: SmallRig

How the mount works

The Support with Cold Shoe Mount is an aluminum arm with a round magnetic plate at the top and a cold shoe foot at the bottom. SmallRig lists dual rotating shafts for multi-angle adjustment, so the phone can be tilted toward the operator, and the MagSafe connection lets you turn the phone from landscape to portrait without tools. According to the B&H listing, the support has seven 1/4″-20 threaded holes in total, and the magnetic plate itself carries two cold shoe mounts plus three of those holes with locating pins. SmallRig specifically mentions its power bank holder (item 2336) as an accessory to attach there, which makes sense with a phone that runs a monitoring app at high brightness. The cold shoe foot also has a 1/4″-20 thread underneath, so the support can go on a tripod or a stabilizer instead.

According to SmallRig’s manual, the support measures 127.4 x 27.6 x 59.0mm / 5.0 x 1.0 x 2.3in and weighs 80g / 3.0oz. It is made of aluminum alloy, silicone and stainless steel, with a silicone ring around the magnetic plate, and an Allen wrench comes in the box.

SmallRig Support with Cold Shoe Mount (5156) with its round magnetic plate and cold shoe base
The SmallRig Support with Cold Shoe Mount (5156). Image credit: SmallRig

The magnet is the limit

SmallRig is open about the trade-off. The company warns that this is a magnetic attachment and that it should not be used during vigorous or high-impact movement. The iPhone Duo weighs 254g / 8.96oz and is 164.6mm / 6.48in wide when unfolded, so a lot of phone sits on a single magnetic contact point, with a tall lever above the camera.

On a tripod, a slider or during calm handheld work, that is probably fine. On a gimbal chasing a subject, on a car mount or in run-and-gun documentary work, I would not trust a phone that starts at $1,999 / €2,299 to a magnet alone. (SmallRig, if you are reading this: a version with a clamp or a locking plate for the Duo would let a lot of people sleep better.) Keep in mind also that the mount only holds the phone. Getting the camera image onto the Duo is a separate job, usually done with a wireless video transmitter and its companion app or with the camera maker’s own remote app.

Price and availability

The SmallRig Support with Cold Shoe Mount (item 5156) is available now for $19.99 at B&H and for the same price in the SmallRig store. CVP does not list it at the time of writing. For more information, please visit the SmallRig website.

Would you put an iPhone Duo on your camera as a monitor, or is a magnet too much of a risk for a phone at that price? Let me know what you think in the comments below!

Leave a reply

Filter:
all
Sort by:
latest
Filter:
all
Sort by:
latest