Advertisement

Panasonic LUMIX SHX1 Lab Test – Rolling Shutter, Dynamic Range and Exposure Latitude

Panasonic LUMIX SHX1 Lab Test - Rolling Shutter, Dynamic Range and Exposure Latitude

The following test results are based on the pre-sample of the Panasonic LUMIX SHX1 that Panasonic supplied to us back in August 2026. This new Panasonic camera incorporates many of the imaging technologies and features found in the LUMIX S1II – tested here (part 1) and here (part 2) – while adding additional value and functionality aimed at professional video production workflows. According to Panasonic, the imaging pipeline of the new SHX1 is final; hence, it felt appropriate to do the lab test with a pre-sample. A huge “thank you” goes out to my colleague Florian, who always helps with shooting and analyzing our Lab Tests!

Now, the year 2026 looks like the year of dual gain cameras. This year we tested the Sony a7R VI, and of course the new Sony FX5. Dual gain mode combines a low and high ISO gain in one exposure, resulting in expanded dynamic range in the shadows, at the expense of rolling shutter, which typically doubles when activated (not so with the Sony FX5, where we saw a 2.4x increase in RS). Now, the most interesting question was whether this new LUMIX SHX1 will show an improvement in the lab over its close sibling, the LUMIX S1II that we tested earlier (part 1, part 2)? Let’s have a look!

LUMIX SHX1 – Image credit: Panasonic

Rolling shutter of the LUMIX SHX1

As usual, we used our strobe light to create the sequences of black-and-white bars, which are characteristic of the read-out nature of rolling shutter sensors.

Similar to the Panasonic LUMIX S1II, the LUMIX SHX1 features two readout modes: 1) a dual gain mode called “Dynamic Range Boost” (DRB with a native ISO 1000, and 2) a normal mode without DRB and a native ISO of 640.

Those two differ significantly in the rolling shutter department: for full-frame 5.8K ProRes RAW mode and DRB “ON,” we get 26.2ms of rolling shutter:

Image credit: CineD

That is a tiny bit faster than the LUMIX S1II (which scored 27.5ms), but significantly slower than the recent Sony a7R VI, which scored 15.6ms in dual gain mode (though limited to 4K, not 5.8K like the LUMIX SHX1), or the Sony FX5 (lab test here), which scored 13.3ms with dual gain “ON” using 5K 17:9 X-OCN LT (and only 5.6ms with DG “OFF”).

With DRB = “OFF,” we get a rolling shutter of 12.2ms ( vs. 12.7ms on the LUMIX S1II).

Unfortunately, nowadays, a rolling shutter of 26.2ms is no longer up to the mark (for dual gain mode). I wonder whether Panasonic can use some cooling capacity of the larger body to overclock the sensor readout?

Dynamic Range of the LUMIX SHX1

Let’s first look at the waveform plot of 5.8K ProRes RAW full frame mode with DRB = “ON” at ISO1000:

Waveform plot of the LUMIX SHX1 at 5.8K ProRes RAW with DRB = “ON”. Image credit: CineD

We can identify a solid 13 stops above the noise floor, with a hint of a 14th and 15th stop inside the noise floor. IMATEST confirms this:

IMATEST result for 5.8K ProRes RAW DRB = “ON”. Image Credit: CineD

We are getting 13.2 stops at a signal-to-noise ratio (SNR) of 2, and 14.3 stops at SNR = 1. Again, this is a tad better than the LUMIX S1II, which scored 12.9 / 14.2 stops at SNR = 2 / 1.

Also, the noise spectrum graph on the lower right-hand side reveals high amplitudes at high frequencies (= high resolutions). Hence, a very detailed image without much internal noise reduction!

DRB = “OFF” at ISO640 reveals 11.6 / 12.9 stops at SNR = 2 / 1.

The Sony FX5 scored slightly better with 5K 17:9 X-OCN LT, exhibiting 13.4 / 14.4 stops at SNR = 2 / 1.

We also had a look at 5.8K ProRes HQ 4:2:2 at ISO 1000, and here we are getting the following waveform:

Waveform plot of the LUMIX SHX1 at 5.8K ProRes HQ with DRB = “ON”. Image credit: CineD

Again, 13 stops can be identified above the noise floor. IMATEST reveals the following:

IMATEST result for the LUMIX SHX1 in 5.8K ProRes HQ DRB = “ON”. Image Credit: CineD

We get 12.6 / 13.9 stops at SNR = 2 / 1. That is exactly the same result that we got for the LUMIX S1II. But if we take a closer look at the LUMIX S1II result below, we can see in the lower left-hand graph a significant difference (red circle):

IMATEST for the LUMIX S1II

Back when we tested the LUMIX S1II, we were complaining that the ProRes HQ 4:2:2 mode has too much noise reduction applied, as we could not differentiate the red, green, and blue channels anymore (and the noise spectrum graph on the lower right shows low amplitudes already at moderate frequencies).

Now the LUMIX SHX1 graph clearly shows a difference across the RGB channels, and amplitudes are higher for higher frequencies – hence a clear sign that the internal noise reduction is less aggressive, keeping the RGB channels intact, and leads to higher resolutions without impacting the overall dynamic range score! That is a very welcome improvement!

Latitude results for the LUMIX SHX1 in ProRes RAW with DRB = “ON”

Now, if all goes well, we should be able to see the full power of the 12-bit RAW codec in our latitude test. As a quick reminder, latitude is the capability of a camera to retain details and colors when over- or underexposed and pushed back to a base exposure. This test is very revealing, as it pushes the complete image pipeline of any camera to its absolute limits, not just in the highlights but mainly in the shadows.

As usual, the latitude test is performed in DaVinci Resolve, and now we have native support for ProRes RAW.

Our studio base exposure is (arbitrarily) chosen as having an (ungraded) luma value of around 60% on the forehead of our subject on the waveform monitor, in this case, my colleague Nino:

From here, we can overexpose 5 stops before the red channel at the forehead is at the cusp of clipping (but still intact):

Now let’s underexpose by stopping down the iris of our ZEISS Compact Prime 85mm T1.5 in one-stop increments until T8, and then doubling the shutter value. All the files are then normalized back again to the base exposure levels using ISO and exposure offset in the camera RAW tab of DaVinci Resolve. Also, we are using a color space transform (CST) to transform the V-Log files first to a DaVinci intermediate, and then to Rec 709.

In general, the ProRes RAW files have a fine, organic noise which looks really great to my eye, and at 3 stops of underexposure and pushed back to base, for the first time, some fine noise starts to appear in the image (we are at 8 stops of exposure latitude). Nothing to worry about; hence, let’s move to 4 stops of underexposure, which reveals the first significant evidence of noise:

We are at 9 stops of exposure latitude. Noise is easy to remove from the above image. Hence, let’s move to 10 stops, at 5 stops underexposure and pushed back to base:

This definitely requires noise reduction, but can be cleaned up:

Here, already quite some balance between temporal and spatial noise reduction needed, and caution is required not to break the image. The results are becoming “borderline”. Very similar to the LUMIX S1II – but to my eye, the LUMIX SHX1 image at 5 under-pushed back looks a tad better. Somehow the noise can be controlled better.

That said, there are no horizontal lines or vertical stripes, and no significant color shifts. We are at the level of the ARRI Alexa Mini LF!

At 11 stops of exposure latitude, the image breaks. Let’s have a look first at the image without NR, and then below, using NR:

A strong color cast towards green is evident, and we have larger blotches of chroma noise hovering/pumping around the moving image. Even when using the latest AI UltraNR noise reduction feature in DaVinci Resolve, this image cannot be cleaned up any longer – game over!

The Sony FX5 (Lab Test here) behaved a bit better in the latitude section; we were able to push it to 11 stops.

Summary

The Panasonic LUMIX SHX1 shows a mixed bag in our Lab Test. The rolling shutter side, especially with DRB = “ON” and 26.2ms, is lagging behind most of its direct competitors. I was hoping that the larger body of the SHX1 compared to the S1II would be used by Panasonic to overclock the sensor but still manage the required cooling. This is not the case; hence, the rolling shutter remains the Achilles’ heel of the LUMIX SHX1. Everything else, like the dynamic range, is on a really high level; also, the exposure latitude is at the top of its class for a full-frame sensor, competing with the ARRI Alexa Mini LF!

We also added the camera to our Camera Databases, so go and have a look!

A worthy mention is the new ProRes HQ 4:2:2 mode, which has less aggressive internal noise reduction.

Nevertheless, we now have a small sensor camera (1″) using the new LOFIC technology that is beating the new LUMIX SHX1 on all Lab Test fronts – the wide camera of the DJI Osmo Pocket 4P! Let’s hope this technology eventually also finds its way into larger sensors. Good times ahead.

Are you excited for this new Panasonic camera? Are you surprised by our results? Let us know in the comments section below!

Leave a reply

Filter:
all
Sort by:
latest
Filter:
all
Sort by:
latest