NEW PODCAST: Can Anyone Shoot an IMAX Film? From Production to the Big Screen – Focus Check ep142 →🎙️ WATCH/LISTEN Now
Watch/Listen NowCan Anyone Shoot an IMAX Film? 🎙️NEW PODCAST
Education for Filmmakers
Language
The CineD Channels
Info
New to CineD?
You are logged in as
We will send you notifications in your browser, every time a new article is published in this category.
You can change which notifications you are subscribed to in your notification settings.
More than 15 years after it first ran on the Canon EOS 5D Mark II, Magic Lantern is still the base for new camera software, and a César-winning filmmaker still shoots 14-bit RAW with it on a 5D Mark III. The newest projects built on top of it are not about video at all: they turn old Canon DSLRs into film cameras with in-camera film looks, fixed-length rolls and locked shutters.
This is part five of our series on camera firmware hacks, after fpSup on the SIGMA fp, the shutter-angle hack on the Sony a7 IV and Wonder Lantern on the Nikon Z30. For many CineD readers, Magic Lantern is where all of this started. It brought RAW video to a list of Canon DSLRs in 2013, gave the 5D Mark III a boost in dynamic range with Dual ISO, and made the 5D Mark III a serious RAW camera, with all the things you had to know before shooting RAW on it. In 2025, we reported that Magic Lantern is back with a new core team and support for DIGIC 6 and 7 cameras such as the EOS 200D, 6D Mark II, 750D and 7D Mark II.
What has changed in 2026 is who builds on it. Small one-person projects now appear for cameras that are 13 to 20 years old, and my guess is that AI assistants help many of these developers read the old code, as they openly do on other cameras in this series. I find that remarkable, and I think it says a lot about how good some of those Canon bodies still are.
The Magic Lantern team insists on one distinction, and it matters for the risk. In the words of its GitHub repository, Magic Lantern “is not a hack, or a modified firmware, it is an independent program that runs alongside Canon’s own software”. Each time the camera starts, it loads Magic Lantern from the memory card. The only permanent change is a flag that allows the camera to boot from the card, and it can be reversed. The team also maintains a patched version of the QEMU emulator that can run camera ROMs, so developers can test without a physical camera.
The film-look projects below all depend on this. They replace or extend Magic Lantern’s own startup file, so you install Magic Lantern first, check that it works, and only then add the new files. They are also tied to exact Canon firmware versions, the same way Magic Lantern builds are.
For video, the most interesting document I found this autumn is not a new mod but a detailed workflow write-up. Filmmaker Ismael Joffroy Chandoutis, whose film Maalbeek won the César for Best Documentary Short in 2022, publishes his complete approach in a GitHub repository called Open Source Cinema. He has worked with Magic Lantern since 2013, and parts of his film Ondes Noires were shot on Canon DSLRs with Magic Lantern RAW and matched with Blackmagic and RED Dragon footage in DaVinci Resolve.
His write-up is a good summary of what Magic Lantern still offers on the 5D Mark III: 14-bit RAW, lossless LJ92 compression that he says cuts file sizes by about 48 to 58%, Dual ISO, crop modes with full-sensor and 1:1 readouts, and an SD card overclock module that raises the SD controller from Canon’s 24 MHz to 240 MHz for up to 100 MB/s. He recommends a community build called crop_rec_4k by developer Danne, on Canon firmware 1.1.3 or 1.2.3, and MLV App for RAW processing. His dynamic range figures for Dual ISO are his own estimates, and I would treat them that way. But the point stands: a 5D Mark III from 2012 still records RAW video that a working filmmaker uses next to cinema cameras.
There is also new work on the RAW side. On the Magic Lantern forum, a user called SpicyBoi posts tests of autofocus during RAW recording on the 5D Mark III, and of autoexposure and crop-mode autofocus on the 70D, from October 2026. These are experiments in forum threads, not finished builds, so I would not plan a shoot around them yet. And for processing, MLV App now has company: Kinochrome is an open-source RAW video processor that uses the graphics card. It is still in an alpha state.
The new projects are for stills. Soup Engine runs on the original Canon EOS 5D from 2005, with Canon firmware 1.1.1 and a CompactFlash card. Press the trash button, and a list of 13 film stocks appears on the rear screen. Every photo after that gets a second JPEG next to the untouched RAW file, with the look applied. By default, the camera now develops that JPEG from the one it has already made, which takes seconds rather than minutes, while you keep shooting. The stocks are small text files on the card, and a web editor called Soup Stocks lets you build your own, with a preview that uses the same engine code compiled to WebAssembly.
Since my first look at the project, Soup Engine has grown from one camera to eight versions. The community ports now cover a half-frame version for the 5D, the original EOS 6D with firmware 1.1.6, the original EOS 7D with 2.0.3, the EOS 50D with 1.0.9, the EOS 60D with 1.1.1, the EOS 100D, also sold as the Rebel SL1, with 1.0.1, and the EOS 700D, also sold as the Rebel T5i and Kiss X7i, with 1.1.5. Each camera has its own folder with its own install steps, and the project warns that the files from one folder do not work on another camera. The engine itself is plain integer C code, and the same files build for the camera and for the desktop, so the tools on a computer can check the camera’s output byte for byte. A free Mac app called SoupDesk, by the developer of the 7D port, applies the same film stocks to RAW files and JPEGs on the desktop. Soup Engine is beta software under the GPL v2 license and, as its author puts it, “unofficial code on cameras that are well over ten years old”.
Film Roll by photographer Florin Kiritescu goes further and copies the limits of film, too. You load a roll of a film stock, shoot 12, 24 or 36 frames at that film’s ISO, and when the roll is finished, the shutter locks until you load a new one. Beta 1.1 runs on the Canon EOS 6D with firmware 1.1.6, the 5D Mark III with 1.2.3 or 1.1.3, and the 7D with 2.0.3. On the 6D and on the 5D Mark III with 1.2.3, the film look, including halation, goes into the JPEG at the moment of the shot; on the other two, the camera develops the JPEG right after the shot. Five of the 15 film stocks are free, and donors get all of them.
M-Film replaces Canon’s menus with a film-camera interface: a shelf of 68 film stocks, a frame counter, a viewfinder overlay with a light meter needle and no image review after each shot. You develop the roll in the camera or on a computer, and every RAW file is kept. It started on the EOS M, and testers have now confirmed it on ten cameras: the EOS M, 100D, 650D, 6D, 550D, 600D, 60D, 500D, 50D and 1100D. A build for the EOS 1300D is waiting for its first tester. On the 700D, the 70D, the 5D Mark III and the 5D Mark II, there are known problems, with most 5D Mark II bodies hanging at power-on. For full-resolution development on a computer, the developer now offers a desktop app called Darkrooms, which is free for one roll a day, with a paid version for $2.99 a month or $14.99 once. The in-camera darkroom stays free. Since version 0.2.3, the camera and the Darkrooms app develop a roll with the same colors. I also like how open the developer is about the looks: none of the 68 film stocks has been measured against the real film yet. Most are made in the style of their film, and the project explains that a stock counts as measured only when it matches a lab scan of the real film, shot next to a Canon.
Version 1.2.1 of The Ritual by Latent Studios brings its film looks to the EOS 5D, 5D Mark II and 5D Mark III, the last on firmware 1.2.3 or 1.3.6, and now also to the original EOS 6D on firmware 1.1.9. The 5D models need a CompactFlash card of 8GB or more, and the 6D needs an SD card of 64GB or more. The Ritual is sold on a pay-what-you-want basis from $0 to $100, with the same firmware at every price.
A reader of our overview pointed me to one more film-camera idea, and it is a nice one. Developer anibarro has released an XPan build of Magic Lantern for the original EOS M on Canon firmware 2.0.2. It gives the camera the 65:24 panorama frame of the Hasselblad XPan, a shooting display for it, in-camera 3D LUT looks with grain and an optional watermark. Because it changes the color tables, the JPEG encoder and the sensor crop, it does not work with most other Magic Lantern modules. It is version 1.0, and you use it at your own risk. Since then, anibarro has added a module called livecomp to the same repository. It gives the EOS M the Live Composite and Live Bulb modes known from Olympus cameras: the camera takes a series of full-resolution exposures of 2 to 60 seconds each, shows the picture as it builds up on the screen, and saves one RAW DNG file when you press SET.
My feeling is that Canon DSLRs get this attention for two reasons. Magic Lantern has done the hard work of documenting these cameras for 15 years, so a new developer starts from a working framework, not from a raw firmware dump. And the bodies are cheap on the used market and still produce great files. The EOS M, for example, remains popular because of Magic Lantern; we wrote about that when the Filmatura M-Lite REVO cinema conversion kit for it launched. What none of these film-look projects has reached yet is the EOS R system, where Magic Lantern itself is still experimental. But there is movement there, too. A reader pointed me to a short YouTube test from November 6, in which developer Bilal Fakhouri records RAW video on an EOS R8 with Magic Lantern. On the Magic Lantern forum, an early port for the EOS M6 Mark II is described as one that "almost, but not quite, works for raw video". Neither is a build that you can install yet. (Canon, a RAW video option or a film-look mode on an older EOS R body would be a nice way to show that you have noticed.)
Magic Lantern, Soup Engine and M-Film are free and open source under the GPL, and M-Film’s optional Darkrooms desktop app has a paid version. Film Roll is a free beta with extra film stocks for donors, and The Ritual is pay what you want. All of them are unofficial, not supported by Canon, and used at your own risk. The Canon DSLRs they run on are discontinued and available only used. For more information, please visit the Magic Lantern website.
Do you still shoot with Magic Lantern on a Canon DSLR? Would you load a film roll into your old 5D? Let me know what you think in the comments below!
Δ
Stay current with regular CineD updates about news, reviews, how-to’s and more.
You can unsubscribe at any time via an unsubscribe link included in every newsletter. For further details, see our Privacy Policy
Want regular CineD updates about news, reviews, how-to’s and more?Sign up to our newsletter and we will give you just that.
You can unsubscribe at any time via an unsubscribe link included in every newsletter. The data provided and the newsletter opening statistics will be stored on a personal data basis until you unsubscribe. For further details, see our Privacy Policy
Nino Leitner, AAC is Co-CEO of CineD and MZed. He co-owns CineD (alongside Johnnie Behiri), through his company Nino Film GmbH. Nino is a cinematographer and producer, well-traveled around the world for his productions and filmmaking workshops. He specializes in shooting documentaries and commercials, and at times a narrative piece. Nino is a studied Master of Arts. He lives with his wife and two sons in Vienna, Austria.