NEW PODCAST: LUMIX SHX1: Is Panasonic Back for Video Pros? | Final Cut Pro 13 with MotionVFX, Reviewed – Focus Check ep143 →🎙️ WATCH/LISTEN Now
Watch/Listen NowLUMIX SHX1: Is Panasonic Back for Video Pros? 🎙️NEW PODCAST
Education for Filmmakers
Language
The CineD Channels
Info
New to CineD?
You are logged in as
We will send you notifications in your browser, every time a new article is published in this category.
You can change which notifications you are subscribed to in your notification settings.
Panasonic had to choose between IBIS and a built-in ND filter for its new LUMIX SHX1 box camera – and it picked IBIS. That is one of the answers Johnnie brought back from his interview with Panasonic’s Tsumura-san, along with why Blackmagic RAW only records externally to SSD for now. The Panasonic LUMIX SHX1 body costs $4,698, or €4,403 excluding VAT at CVP.
Nino is alone in the HQ podcast studio this week, while Johnnie joins from Japan, where he is covering InterBEE. The start out together by working through Johnnie’s review and mini-documentary of the LUMIX SHX1, his conversation with Tsumura-san and our SHX1 Lab Test. Johnnie then heads off and Nino takes over alone for his Final Cut Pro 13 first look – and why the MotionVFX library makes him subscribe to Apple Creator Studio – and the first batch of AI-assisted camera firmware hacks for SIGMA, Sony and Nikon.
This episode is sponsored by Hollyland – check out the on their website. (06:09 in the episode)
(02:46 in the episode)
On paper, the SHX1 looks like a reboxed LUMIX S1II, but Johnnie found more changes the longer he used it: a partially stacked 6K full-frame sensor behind an optical low-pass filter that tackles moiré, Blackmagic RAW recording to an external SSD over USB-C, ProRes RAW internally, ARRI LogC3 pre-installed at no extra cost and 32-bit float audio in camera. Why pick it over the S1II? Johnnie starts with visibility – Panasonic has not had a proper A camera since the VariCam and the EVA1 – followed by less aggressive noise reduction in ProRes, USB-C for every accessory and a V-mount battery plate.
There is no internal ND. Tsumura-san told Johnnie that Panasonic had to choose between IBIS and ND because both sit right at the sensor, and the creators it asked voted for IBIS – a call Johnnie agrees with. Instead, Tilta’s Mirage variable ND can be controlled from the camera menu. Nino points out that Sony’s BURANO does combine IBIS and an internal ND, albeit in a bigger body. Johnnie’s two main criticisms: the camera can power either an EVF or an external SSD over USB-C, not both, and there is no built-in EVF. Nino thinks the flexible built-in monitor is the right call for this form factor; Johnnie still misses a viewfinder on sunny days.
Read more: Panasonic LUMIX AU-SHX1 announced
(18:31 in the episode)
Johnnie’s mini-documentary portrays Michelle, who comes from a Korean family and had an extremely rough start in life. He asks you to watch it for her story rather than for the camera. He shot it on the Atlas Mercury 42mm 1.5x anamorphic, whose price has dropped from $7,499 to $4,499, lit it with our OrBrella and graded it in fylm.ai after a pre-release DaVinci Resolve build refused to install. For extra shooting in Japan, he recorded BRAW to an Angelbird card in a USB-C reader instead of an SSD. What gets too little attention, in his view: vertical shooting, with anamorphic de-squeeze and stabilisation designed for it, and the modular system – XLR handle, a grip for Panasonic’s upcoming power zoom, and a live production unit that makes the SHX1 “a PTZ camera on steroids”.
From the Tsumura-san interview: internal BRAW is technically not possible on this model yet, not a deliberate omission. Nino adds that Japanese manufacturers build features into dedicated hardware – reliable, but slow to gain new tricks – while Blackmagic Design and RED emulate more in software. There was no confirmation of an S9 successor, but Johnnie reads the signals as pointing towards one with an EVF. Pricing: $4,698 for the body (€4,403 excl. VAT at CVP), $5,498 or €5,004 excl. VAT for the kit with handle and grip. Johnnie names the SHX1 and the Sony FX5 as strong camera of the year candidates.
Read more: Panasonic LUMIX SHX1 review and mini-documentary | Tsumura-san interview
(31:27 in the episode)
Gunther tested a pre-production sample after Panasonic confirmed its image processing was final. Rolling shutter is the Achilles’ heel: 26.2ms in 5.8K ProRes RAW with Dynamic Range Boost on and 12.2ms with it off – almost identical to the S1II (27.5ms / 12.7ms) and about twice the Sony FX5’s 13.3ms in dual gain. Dynamic range is strong at 13.2 stops (SNR 2) and 14.3 stops (SNR 1) at ISO 1000 with DRB on, close to the FX5’s 13.4 / 14.4 – the same sensor as the S1II, as Johnnie stresses, with different processing. ProRes HQ reaches 12.6 / 13.9 stops with less aggressive noise reduction than the S1II, which was our main criticism of that camera. Latitude is usable to about 10 stops pushed and breaks at 11.
Nino’s wider point: the 1-inch LOFIC sensor in the DJI Osmo Pocket 4P now beats all of these cameras on dynamic range and rolling shutter, and everyone is waiting for LOFIC to reach full frame.
Read more: Panasonic LUMIX SHX1 Lab Test
(36:38 in the episode)
Final Cut Pro 13 is still a free update for everyone who bought the app – Nino bought Final Cut Pro X well over a decade ago. One reason makes him subscribe to Apple Creator Studio anyway ($12.99 a month or $129 a year, including Pixelmator Pro, Motion and Compressor): the MotionVFX library. Since Apple acquired MotionVFX, subscribers get mRotoAI, mTracker Surface, mTracker 3D, mTracker 3D Area, mFlare 2, mFilmLook and mPuppet built in – only mUpscalerAI and mCaptionsAI are missing. MotionVFX’s own CineStudio plan alone costs $29 a month or $348 a year. The new Content Hub adds royalty-free stock video and stills, mostly 4K and already graded rather than log.
Features for all users include Natural Motion Blur, which analyses a clip to simulate a slower shutter, a Disconnect Clips command that finally frees connected clips from the primary storyline, split-screen presets for horizontal and vertical, new keyframe easing and transcription in 23 more languages, including German. Final Cut Pro and Motion also gain text-to-image generation. Nino’s verdict: this is how a creative software subscription should work – and he expects more people to look at cancelling Adobe.
Read more: Final Cut Pro 13 first look
(49:35 in the episode)
We get around five submissions a day for vibe-coded filmmaking tools, and the same AI tools now let the community hack cameras for features owners have always wanted – reminiscent of Magic Lantern on the Canon 5D Mark II. A Tony Northrup video sparked the series. Nino sorts the mods into three risk tiers: card-loaded code that leaves the flash untouched, service-mode settings that can be reversed from a backup, and patched firmware – the only kind that can brick a camera. Warranties may be void, so it is all at your own risk. Nino’s take: AI makes finding hidden settings faster but does not verify behaviour, and GoPro Labs shows how manufacturers could offer this officially.
Read more: Camera firmware hacks are back
(53:37 in the episode)
fpSup works only on the original SIGMA fp (not the fp L) on firmware 5.02, loading from an AutoRun.txt file on the SD card without writing to flash. It adds open gate formats the fp never had – OG2K, S16, OG3K, OG3.5K and OG4K (3840 × 2560) – with the two largest limited to 23.98–29.97p, now in 12-bit. Data rates run from 98 MB/s for OG2K to 354 MB/s for OG4K, so the bigger formats need an SSD. fpSup-Lossless uses the camera’s hardware codec to shrink a 3K 12-bit frame from 9.1 MB to about 3.2 MB, and gyro data in every CinemaDNG frame feeds Gyroflow. Nino would like SIGMA to add lossless compression officially – though with the fp’s successor out, he is not sure it will.
Read more: SIGMA fp fpSup mods
(57:43 in the episode)
Someone has finally given the Sony a7 IV a shutter angle. On firmware 6.02, values from 360° down to 5.6° are written over Sony’s USB service mode – no firmware is replaced – though the camera’s dials cannot change the angle yet. The firmware also holds Log Shooting code (S-Log3, S709 and R709 LUTs, 16 user slots, .cube parsing) with no menu, and 1.3x and 2x de-squeeze is a strong candidate but untested – Nino would add 1.5x too. No open gate path has been found. With the a7 IV still selling for about $2,000, Nino sees these as relatively safe tweaks that Sony could ship officially.
Read more: Sony a7 IV shutter angle hack
(59:54 in the episode)
Wonder Lantern patches the user’s own Nikon Z30 firmware C 1.20 file on a computer rather than touching the camera directly. It lifts 4K 24/25/30p from Nikon’s 144 Mbps to 168 Mbps (Balanced) or 200 Mbps (High, not yet confirmed on a camera), raises Full HD 60p bitrates, extends the slow-motion limit from 3 to 25 minutes and adds photo zebras and a 5 GHz Wi-Fi option. Because it is a real firmware patch, Nino calls it the riskiest mod so far – he would not try it on a camera he relies on, but it could give a retired Z30 a second life.
Read more: Nikon Z30 Wonder Lantern mod
(01:01:59 in the episode)
The most ambitious mod yet, tipped off by a reader: NikonFirmwarePatch 0.4.0 works only on Z8 firmware C 3.11 – if you are already on C 3.12, you may be out of luck. It adds 8.3K 3:2 open gate N-RAW (8256 × 5504) at 24, 25 and 30p, N-RAW Fine and Basic, de-squeeze from 1.25x to 2x, ProRes 422, LT and Proxy, H.265 bitrate scaling, and S-Log3 and Log3G10 alongside N-Log. For photos, there is RAW pre-release capture and in-camera pixel shift up to 16512 × 11008. Real-camera testing is thin and there are open questions on saturated blues and S-Log3 shadows, so Nino would watch from the sidelines before risking his own Z8. Next week: Magic Lantern’s return on Canon DSLRs, and more.
Read more: Nikon Z8 NikonFirmwarePatch
Would you install a firmware hack on your own camera? Let us know in the comments below or on YouTube, or email us at [email protected] – and don’t forget to subscribe to Focus Check on your favourite podcast platform.
Δ
Stay current with regular CineD updates about news, reviews, how-to’s and more.
You can unsubscribe at any time via an unsubscribe link included in every newsletter. For further details, see our Privacy Policy
Want regular CineD updates about news, reviews, how-to’s and more?Sign up to our newsletter and we will give you just that.
You can unsubscribe at any time via an unsubscribe link included in every newsletter. The data provided and the newsletter opening statistics will be stored on a personal data basis until you unsubscribe. For further details, see our Privacy Policy
Videographer with a deep audio background — including 7 years at a microphone manufacturer. Currently working in broadcast production and specialized in video podcast production. Co-founder of Yon.studio