NEW PODCAST: Can Anyone Shoot an IMAX Film? From Production to the Big Screen – Focus Check ep142 →🎙️ WATCH/LISTEN Now
Watch/Listen NowCan Anyone Shoot an IMAX Film? 🎙️NEW PODCAST
Education for Filmmakers
Language
The CineD Channels
Info
New to CineD?
You are logged in as
We will send you notifications in your browser, every time a new article is published in this category.
You can change which notifications you are subscribed to in your notification settings.
Small crews rarely need a broadcast intercom, but the director, camera operator, and gaffer still need to talk to each other without pressing a button on a walkie-talkie. The Hollyland Solidcom SE Global Version is a 2.4GHz full-duplex headset system for teams of two to five people, with dual-mic noise cancellation, detachable batteries, and a range of up to 350m (1,100ft). From November 19 to November 30, Hollyland is offering up to 33% off the system for Black Friday. Here is what the Solidcom SE does on set, how the kits differ, how the Global Version compares with the SE Pro, and where its limits are.
We have covered Hollyland’s intercom line for years, from our Solidcom M1 review to the Solidcom C1 Pro and the larger Solidcom H1. The Solidcom SE Global Version sits at the small-crew end of that range. In our guide on how to choose a wireless intercom system for film production, we looked at where systems like this fit into different production sizes and workflows. Hollyland also offers the 1.9GHz Solidcom SE Pro, which extends the range and supports larger teams, so we will look at where the two versions differ below.
The Solidcom SE Global Version operates in the 2.4GHz band with automatic frequency hopping and a line-of-sight range of up to 350m (1,100ft). Each headset weighs approximately 185.2g (6.53oz) with its battery and uses dual-microphone Environmental Noise Cancellation (ENC), rated at more than 20dB of noise reduction. One master headset supports up to four remotes, giving the system up to five users.
The important difference between an intercom and a walkie-talkie is not simply wireless range. In full-duplex mode, everyone in the Solidcom SE system can talk and listen at the same time, more like a phone call than a radio conversation. There is no need to wait for a channel to clear before answering.
On a three-person shoot, for example, a director can speak to the camera operator and gaffer continuously while all three hear the same conversation. A five-headset kit could add an assistant and another camera or lighting crew member. Everyone remains in one group, however. There are no separate channels for camera, lighting, or other departments.
For crew members who only need to speak occasionally, the SE also supports Push-to-Talk. The microphone boom can be moved up to mute the headset, while a button switches between mute and talk with a single press.
The headsets arrive pre-paired, so a kit works out of the box. If another remote is added later, pairing is done by holding the volume + button on the master and remote headset until they connect.
The dual-mic ENC system processes the microphone signal to reduce ambient noise around the speaker’s voice. Hollyland specifies more than 20dB of environmental noise reduction from all directions and a signal-to-noise ratio of 71dB (±2dB). The electret microphone handles more than 115dB SPL, while the frequency response is 150Hz to 7kHz.
That frequency range is designed around speech. The Solidcom SE is therefore a communication system rather than a headset for monitoring production sound.
Hollyland also uses an algorithm to reduce wind noise outdoors. The headsets are rated IPX4 for water resistance, which provides protection against splashing water but does not make them waterproof. The operating temperature is 0 to 45°C (32 to 113°F).
Each headset runs on a detachable 770mAh (2.926Wh) Li-ion battery pack that charges in less than three hours. Every Global Version kit includes one battery per headset and a 6-slot charging base. Spare batteries are sold separately, and the headsets can also be powered over USB-C.
The remotes are rated for approximately 12 hours, which should cover many production days. The master is the one to watch. With four remote headsets connected, Hollyland rates it at approximately 10 hours.
On a long shooting day, a spare battery for the master is a sensible addition. Because the batteries are removable, swapping one is faster than putting the whole headset out of service to recharge it. USB-C charging also means a power bank can keep a headset running if no charged spare is nearby.
Not every crew member wants to wear a headset all day. The USB-C port accepts Hollyland’s USB-C to 3.5mm adapter, letting the Solidcom SE sit around the neck while the user listens through a separate 3.5mm earpiece. Hollyland notes that only its own adapter supports this, and it isn’t included in the kits. Communication still uses the headset microphone.
For comfort, Hollyland compares the headset weight to a smartphone. The ear pads and microphone cushions are replaceable, which is useful when crew members share headsets. Over-ear pads are also available separately.
The Solidcom SE Global Version comes in three configurations. The 2S kit includes one master and one remote headset; the 4S kit has one master and three remotes; and the 5S kit includes one master and four remotes.
The 2S and 4S kits can be expanded with additional remote headsets, so a crew can start small and add users later without replacing the whole system. A two-person setup can therefore grow to four or five users as production needs change, while the 5S kit arrives ready for the maximum supported crew size.
For small productions, that covers a useful range of setups, from a director and camera operator to a five-person team with additional camera, lighting or production crew. The ceiling is five users, so productions that need larger teams or separate communication groups will need to move to a bigger intercom system.
The Solidcom SE Global Version is also not compatible with the Solidcom C1 or C1 Pro.
The 2.4GHz band is shared with Wi-Fi, Bluetooth, and many wireless video transmitters. Automatic frequency hopping helps the SE move away from interference, but a crowded set or trade show can still be a more difficult RF environment than an open location. The quoted 350m (1,100ft) range is also a line-of-sight figure, so walls, vehicles, and other obstacles can reduce the usable distance.
The other limits come from the size of the system itself: five users at most, one talk group, and no compatibility with Hollyland’s other intercom systems. For a corporate shoot, documentary unit, or small commercial crew, those restrictions may not matter.
Hollyland sells a second system with almost the same name: the Solidcom SE Pro, which we covered at its launch in April 2025. Both systems use 770mAh batteries, a 150Hz to 7kHz frequency response, more than 20dB of environmental noise reduction, and headsets weighing approximately 185.2g (6.53oz). Both also support Hollyland’s USB-C to 3.5mm earpiece adapter. The two systems aren’t compatible, so keep that in mind if you plan to expand the system later.
The most important difference is the radio. The SE Global Version transmits in the 2.4GHz band, which it shares with Wi-Fi, Bluetooth, and many other devices on set. The SE Pro uses the 1.9GHz DECT band, which Hollyland says keeps it clear of interference from 2.4GHz devices. Both systems use automatic frequency hopping. The SE Pro also has a longer line-of-sight range of 400m (1,300ft), compared with 350m (1,100ft) for the SE.
The second difference is team size. The SE stops at five users. The SE Pro supports up to 11 users with additional remote headsets and the required firmware update, and Hollyland sells it in 2S, 4S, 5S, 6S, and 9S kits. However, a larger system shortens the master headset’s battery life. Hollyland rates the SE Pro master at more than 5 hours with five remotes and around 3 to 3.5 hours with ten remotes, while each remote runs for more than 10 hours. Each SE Pro kit includes two batteries per headset, while the SE includes one.
Handling is nearly identical on both systems. Both the SE and SE Pro have MUTE and PTT functions, and on both you control talking with the microphone boom. The protection is different: Hollyland describes the SE Pro as dust- and water-resistant, while it describes the SE as water-resistant only. Neither product page gives an IP rating. Hollyland also claims an upgraded algorithm with speech enhancement for the SE Pro.
The SE Pro costs more. Its 4S kit has a list price of $679, compared with $459 for the SE 4S kit, so a four-person SE Pro system costs $220 more before any discount. The Black Friday offer in this article applies to the SE.
For a crew of up to five people who work mostly on location, away from crowded Wi-Fi, the SE does the job at a lower price. The SE Pro makes more sense for six or more people, for events, studios and trade shows where the 2.4GHz band is busy, or when you need the extra range. Because the two systems cannot be mixed, the SE Pro is also the safer choice if your crew may grow past five people.
Hollyland’s Black Friday offer for the Solidcom SE runs from November 19 to November 30, 2026, with up to 33% off. In the US, the Solidcom SE 2.4G 4S kit drops from $459 to $308 on Amazon US. In the UK, the same kit drops from £354.82 to £237.71 on Amazon UK. For full specifications, visit the Hollyland website.
Do you still coordinate your small-crew shoots on walkie-talkies, or has a full-duplex headset system become standard on your set? Would the five-user Solidcom SE Global Version cover your crew, or would you need the additional capacity of the SE Pro? Let us know in the comments below!
Δ
Stay current with regular CineD updates about news, reviews, how-to’s and more.
You can unsubscribe at any time via an unsubscribe link included in every newsletter. For further details, see our Privacy Policy
Want regular CineD updates about news, reviews, how-to’s and more?Sign up to our newsletter and we will give you just that.
You can unsubscribe at any time via an unsubscribe link included in every newsletter. The data provided and the newsletter opening statistics will be stored on a personal data basis until you unsubscribe. For further details, see our Privacy Policy
A camera was put in my hands at 16, and I’ve been taking photographs ever since. Before moving to Vienna, I worked as a photographer on film sets, telling stories as they unfolded behind the scenes. Since then, I’ve focused on immersive theater, both as a photographer and an actor. I am the photographer for the award-winning Nesterval ensemble, documenting the energy and atmosphere of their performances. I’m a teller of stories. Stories hold my interest. I’ll take on any project with a story to tell.