Advertisement

Bright Tangerine LeftField System Is Now Compatible With RED KOMODO-X

Bright Tangerine LeftField System Is Now Compatible With RED KOMODO-X

Bright Tangerine recently introduced a new version of their LeftField 3 camera support system for the RED KOMODO-X camera. You can either buy different support kits or you can combine your existing LeftField system with new parts to make it compatible with the specific mounting points of the KOMODO-X. Prices start at $837 for the Base Kit and up to $1,467 for the Expert Kit. Let’s have a closer look at the different options.

British manufacturer Bright Tangerine is known for camera accessories and rigging solutions. The LeftField camera support system for the RED KOMODO was introduced two years ago, and yes, they’re not inexpensive, but you will get solid quality for your money. If you are unfamiliar with them, please check out this short article.

RED KOMODO-X

The new RED KOMODO-X is something between the original KOMODO 6K and the V-RAPTOR S35. The first limited edition in shiny white is sold out, but now you can get the camera in a standard black version for $9,995. Please have a look at this article about the KOMODO-X.

Bright Tangerine RED KOMODO-X LeftField Kit
RED KOMODO-X with LeftField Expert Kit – Source: Bright Tangerine

The KOMODO-X looks very similar to the original KOMODO design, but the mounting points on the bottom of the camera are slightly different. The original KOMODO has a screw spacing of 12,5mm / 0,5 in, but the KOMODO-X has a wider spacing of 25mm / 1 in. Additionally, the new KOMODO-X has a run/stop button on the front of the camera and also features a locking RF mount. This means that the KOMODO-X might not be fully compatible with existing components out there.

RED KOMODO-X
Comparison RED KOMODO Left and RED KOMODO-X Right – Source: RED

LeftField 3 Base Kit

All NEW LeftField 3 kits are compatible with the RED KOMODO and the KOMODO-X. The LeftField 3 Base Kit comes with a left and right-hand side plate featuring three 3/8” and two 1/4″ accessory mounts, a top rail with two 3/8”, one 1/4″ mount, and two Quick Detach (QD) points. The kit includes the standard LeftField 3 15mm LWS universal baseplate, and it is compatible with additional rod-mounted accessories.

LeftField Base Kit – Source: Bright Tangerine

LeftField 3 Advanced Kit

The LeftField 3 Advanced Kit includes the same side and top plates but comes with a Nato top handle. It features multiple accessory mounting points, including a cold shoe, 1/4” mount, and 3/8” anti-twist points. The kit also includes the standard LeftField 3 15mm LWS universal baseplate, a LeftField Dovetail Plate, and a DJI RS 2 & RS 3 dovetail with a riser. This means you have a dual-stage quick-release system for switching between handheld, tripod, or gimbal modes. It is compatible with the DJI RS 2, RS 3, and RS 3 Pro gimbals.

LeftField Advanced Kit – Source: Bright Tangerine

LeftField 3 Expert Kit

The Expert Kit includes all the components of the Advanced Kit but comes with a pair of 30,4 cm / 12 in titanium rods and an additional top bar bracket. With that top bar bracket, you can attach it directly to the NATO top handle to use any 15mm rod-mounted accessory. For example, you can mount an electronic viewfinder or a lens motor without the need for a baseplate.

LeftField Expert Kit – Source: Bright Tangerine

Upgrading for existing customers

If you already own a LeftField 15mm LWS baseplate with a standard riser, Bright Tangerine is providing a set of washers and screws for proper fitment to the baseplate for the KOMODO-X. This is a special order, so you will need to contact the customer support service. The new standard riser already includes everything you need for both cameras.

Bright Tangerine RED KOMODO-X Riser
New Standard Riser for KOMODO and KOMDO-X – Source: Bright Tangerine

If you own a DJI riser you will have to use the universal extended DJI RS 2 & RS 3 Dovetail. It features shuttles with adjustable screw spacing so you can use it with several different camera models.

Bright Tangerine RED KOMODO-X Dovetail
Dovetail – Source: Bright Tangerine

Pricing and availability

The new Bright Tangerine LeftField system and all the different components are compatible with the RED KOMODO and the KOMODO-X and are available for preorder.

  • LeftField 3 Base Kit for $837
  • LeftField 3 Advanced Kit DJI RS 2 & RS 3 for $1,247
  • LeftField 3 Expert Kit DJI RS 2 & RS 3 for $1,467
  • Standard Riser for 15mm Baseplate for $97
  • Universal Extended DJI RS 2 & RS 3 Dovetail for $127.71
  • LeftField 3 Quick Release Baseplate Standard for $617
  • LeftField 3 Quick Release Baseplate DJI RS 2 & RS 3 for $807

For further information, please visit the website of Bright Tangerine here.

What do you think about the LeftField 3 kits from Bright Tangerine? Have you ever used one of their camera support kits? Please let us know your thoughts in the comment section below.

Leave a reply

Subscribe
Notify of

Filter:
all
Sort by:
latest
Filter:
all
Sort by:
latest

Take part in the CineD community experience