NEW PODCAST: LUMIX SHX1: Is Panasonic Back for Video Pros? | Final Cut Pro 13 with MotionVFX, Reviewed – Focus Check ep143 →🎙️ WATCH/LISTEN Now
Watch/Listen NowLUMIX SHX1: Is Panasonic Back for Video Pros? 🎙️NEW PODCAST
Education for Filmmakers
Language
The CineD Channels
Info
New to CineD?
You are logged in as
We will send you notifications in your browser, every time a new article is published in this category.
You can change which notifications you are subscribed to in your notification settings.
NANLITE has announced its new vela series consisting of compact all-in-one LED spotlights in two sizes. The vela 150 and vela 300 each come in a bi-color (b) and a full-color (c) version, and all four lights have a Bowens mount and a built-in power supply. The 150W models can also run from USB-C PD power, a battery grip, or a V-mount battery. Pre-orders are open in the US.
These lights are all-in-one, compact point sources for interviews, livestreams, product shots, and location work. Instead of the usual cylindrical monolight body, the lights use a flat, rounded box with the Bowens mount built into the front. Because the power supply sits inside the housing, one AC cable powers them. We have covered several of NANLITE’s Bowens mount spotlights before, from the FS-150B and FS-200B to the FS-300C and, most recently, the FC-1200B and FC-1200C. The vela models are much smaller, and they are priced well below those lights.
The vela 150b and vela 300b are bi-color fixtures with a range of 2,700K to 7,500K. The vela 150c and vela 300c use NANLITE’s Nebula C4 light engine, which the company also uses in the FC-1200C. They cover 2,400K to 12,000K with ±150 green/magenta adjustment and add an HSI mode (hue 0 to 360, saturation 0 to 100). The full-color models have 14 built-in effects, and the bi-color models have nine.
For color rendering, NANLITE gives an average CRI of 96, TLCI of 98, and TM-30 Rf of 95 for the bi-color models. The full-color models reach an average CRI of 95, TLCI of 94, and TM-30 Rf of 92, and all four have a TM-30 Rg of 100. Dimming goes from 0 to 100% in 1% steps. The housings are color-coded: the bi-color lights are light “Mint Blue”, and the full-color lights are dark “Serene Blue”.
The 150W models have a flat profile of 7cm / 2.76in, with a width of about 12cm / 4.7in, and they weigh 0.9kg / 1.98lb. The full housing measures 160.5 x 123.4 x 69mm / 6.32 x 4.86 x 2.72in. According to NANLITE, they are approximately 60% smaller and 60% lighter than traditional spotlights of the same power rating. The bare beam angle is 85° on the 150b and 60° on the 150c. A detachable 180° mounting bracket with a 5/8″ baby pin receiver attaches to a V-shaped slot on the back, which can also hold a V-mount battery. A 1/4″-20 thread takes the bracket or the battery grip.
Each 150W light ships with the FL-11CP Fresnel lens, a 3m / 9.8ft AC cable, and a carrying bag. The Fresnel lens weighs 188g / 6.6oz, zooms steplessly from 21° to 40° and comes with a clip-on diffuser. Bare, at 1m / 3.3ft and 5600K, NANLITE specifies 10,300 lux for the 150b and 9,750 lux for the 150c. With the Fresnel lens at 21°, these figures rise to 52,600 lux and 44,200 lux. At 40°, they are 21,400 lux and 19,700 lux.
Besides AC power (100 to 240V), the vela 150b and 150c accept USB-C PD 3.1 input from 12 to 28V. The light detects the available power and limits its maximum output to match. A 30W source gives 20% brightness, 45W gives 30%, 60 to 65W gives 40%, 100W gives 65%, and a source of more than 140W gives 90%. Full output is only available on AC.
For handheld or stand use without mains power, NANLITE offers the BT-BG-14.4V73 battery grip. It has a 73Wh battery, USB-C and DC outputs of up to 100W, and a 1/4″-20 screw to mount the light directly. NANLITE quotes up to 45 minutes of runtime at 65% brightness and a recharge time of about 42 minutes with a 100W PD charger. With the CB-DT-PD D-Tap to USB-C PD adapter cable, a 155Wh V-mount battery runs the light for about 1 hour 40 minutes at 65%.
The 300W models have a flat profile of 12cm / 4.72in, with a width of about 14cm / 5.5in, and weigh 2.23kg / 4.92lb, with a housing of 293.5 x 138 x 123.5mm / 11.56 x 5.43 x 4.86in. NANLITE says they are approximately 40% smaller and 30% lighter than traditional spotlights of the same power rating. They have a top handle and a 180° adjustable mounting bracket with a 5/8″ baby pin receiver. The bare beam angle is 75°, and a 40° reflector, a 3m / 9.8ft AC cable and a carrying bag are in the box. The 300W lights run on AC only (100 to 240V, 4A maximum). NANLITE lists no USB-C PD or battery option for them.NANLITE’s size comparison of the vela 150 and vela 300 models with a traditional spotlight.
At 1m / 3.3ft and 5600K, the bare 300b gives 25,350 lux and the bare 300c gives 18,680 lux. With the 40° reflector, NANLITE specifies 66,600 lux for the 300b and 52,200 lux for the 300c. At 3m / 9.8ft, the figures are 6,800 lux and 5,370 lux, and at 5m / 16.4ft, they are 2,454 lux and 1,953 lux. As with the 150W pair, the bi-color version has the higher output.
All four models have one knob, two buttons, and a 1.28-inch display on the back. NANLINK App 2.0 gives wireless control of multiple lights, synchronized group effects and firmware updates. NANLITE describes the cooling system as new for this series. A fan cools the lights, and its speed changes automatically with the temperature. NANLITE gives a noise level as low as 20dB(A) at low fan speed.
Because of the Bowens mount, the lights accept Bowens mount modifiers without an adapter. NANLITE names its PJ-BMCP-36 projection attachment, its Bowens mount reflectors and the Bowens mount versions of its Rapid softboxes. NANLITE has also introduced two small octagonal softboxes with a quick-lock speed ring for the series, the 30cm SB-O-30 and the 40cm SB-O-40.The PJ-BMCP-36 projection attachment and the SB-O-30 and SB-O-40
NANLITE also shows an optional frame that holds four vela 150 lights together as one array, for more output from a single position.
The vela 300b and 300c have no battery or USB-C PD input, so they need mains power or a generator. On the 150W models, PD power limits the output to between 20% and 90%, depending on the source, and the battery grip runs the light for up to 45 minutes at 65% brightness. NANLITE lists on-board and NANLINK App control only, with no DMX or CRMX. The full-color models offer CCT, HSI and effects, but NANLITE does not list a gel or RGBW mode.
In the US, NANLITE takes orders at introductory prices that are below the listed regular prices. The vela 150b costs $167 (regular price $209), the vela 150c costs $199 ($249), the vela 300b costs $239 ($299), and the vela 300c costs $279 ($349). The 2-Light Kits cost $295 for the 150b ($369) and $367 for the 150c ($459). The FL-11CP Fresnel lens costs $19.90 separately, the battery grip $89.90, the D-Tap cable $23.90, and the SB-O-30 and SB-O-40 softboxes $34.90 and $49.90. NANLITE gives the expected availability as “coming soon”.
Would a 0.9 kg Bowens-mount light with a Fresnel lens in the box replace one of your small monolights? Is AC-only power a problem for the 300W models? Don’t hesitate to let us know in the comments below!
Δ
Stay current with regular CineD updates about news, reviews, how-to’s and more.
You can unsubscribe at any time via an unsubscribe link included in every newsletter. For further details, see our Privacy Policy
Want regular CineD updates about news, reviews, how-to’s and more?Sign up to our newsletter and we will give you just that.
You can unsubscribe at any time via an unsubscribe link included in every newsletter. The data provided and the newsletter opening statistics will be stored on a personal data basis until you unsubscribe. For further details, see our Privacy Policy
Johnnie Behiri is a documentary filmmaker with more than three decades behind the camera: he learned the craft in daily television news gathering, filmed for Japan's public broadcaster NHK, and spent eight years shooting and editing for BBC News. He joined cinema5D in 2011 and has co-owned and co-run CineD and MZed ever since. Johnnie writes many of CineD's camera reviews, co-hosts our weekly Focus Check podcast, and heads CineD's manufacturer relationships and product development.